Aes Sedai Dress: Double Feature

I've been attending JordanCon for the past three years.  For those who don't know, JordanCon is a convention dedicated to the Wheel of Time book series, written by Robert Jordan until his death in 2007, and finished by Brandon Sanderson.  It's a fantastic Con, with lost of amazing people attending and working hard to organize it!  

So, for the first JordanCon I attended (in 2013), I didn't dress up in anything but my White Ajah shirt.

So, for the next one I attended (2014), I knew I had to have an Aes Sedai outfit.  Since my Ajah is White, I wanted a white dress.  As luck would have it, I found a white dress for about $20 at an antique store.  I decided to alter it into a dress I could wear.

 Here it is before I did anything to it.  It was huge!

The first thing I did was take the sleeves off with a seam ripper.  Pain in the ass, but necessary.

The dress has a top layer and a bottom layer, so I had to work hard at getting through both layers.  I've never taken on any projects of this magnitude, and I was very overwhelmed!

And here's the top without the sleeve.  Then I had to take the neckline up 2 or 3 inches, so I had to undo the top seam as well.

And here it is!  The arm is completely cut and has no sleeve.  Now, all I had to do was put it back together.

Here it is taken in about 2 inches.  Fits much better!

Sewing the sleeves back on was the hardest thing I've ever done.  I had to take breaks to think about the best way to line them up.  It was crazy and very taxing on my brain.  

Here it is with the higher neckline and the shorter sleeves.  Hard to tell since I'm still swimming in it, but it is a very big improvement.  Here they are side by side, just so you can see.

Next, I decided to get a little crazy.  I thought it would be cutest if I split the dress in half and did a bodice and a skirt.  This would work out best since I wanted to get rid of the zipper (since I had to take it in a few inches in the back as well).  So, I sliced it right along the hip line (right below the zipper).

So here's the top, front and back (notice no zipper?).  I'm leaving it alone for right now and focusing on the skirt.

Okay, here's the skirt.

I thought it would be less plain if I added a peekaboo box pleat into the skirt.  I bought a silver, paisley contrast fabric to go in the back.  It's hard to tell the color because the house was so dark, but the paisley design reminds me of the Flame of Tar Valon.  Fitting, I think.

After some discussion and thought, I decided to do a three panel pleat.  The first (and middle) panel would be 6 inches wide, with two smaller (3 inches wide) panels to either side.  Here's the first panel, with the top layer only folded to give the impression of what it will look like when finished.

Here it is with all three panels.

I pinned the pleats, and then did the hem.  Then, I had to gather the back (the skirt was wider than the bodice since I took it in), and then sewed the bodice to the skirt.

Next, I decided to add in a fabric belt along the waistline.  

It was tricky to do this.  And I'm sure I did it the wrong way.  There are quite a few bunched up areas around the belt, but I'm satisfied with the way it turned out.  I sewed the belt to the bodice, then I had to sew the belt onto the skirt.

And here it is with the belt.  

But I wasn't done there.  I wanted to add something to the bodice to make it look less... weird.  (It looked really weird on me.)  So, I decided to do a strip of the silver material down the center of the bodice with some lace to tie it.

I took a thin strip and sewed up the edges.

Then I added small button holes to put the lace through.  This material is one of the hardest I've ever dealt with.  It SHED so many lose ends and strings.  It was very, very annoying (and it got all over my house).  That was the reason for the button holes.  Without them, the slits for the lace would have been all stringy and gross.

So here's the final product!

And with my very first Aes Sedai shawl (crafted by Pockets): 

And now one last before and after:

So I got to wear that to the JordanCon in 2014.  And I had a really fun time!  (Actually, Pockets went with me that year and that made it so much more memorable!)

For the next year, 2015, I wanted a new dress!  And I was feeling confident enough to make one from scratch; Pockets had made her own the previous year and I had to prove I could do it too!

I started with a crushed velvet fabric in white.

I used Simplicity 1773, the C pattern.

I cut out all my pieces, probably the hardest part of the project.

Sew them together as the instructions say, and voila!

The pattern calls for adding ribbon to the neckline, so I wanted to try that as well.  But, what I used was strips of a purple fabric covered with lace. 

It still looked pretty plain, so I decided to add two strips of fabric going down the front to cover the seams.  I sewed thin lace to the edges of the fabric.

Much more fancy! 

And here I am at JordanCon, with my trusty White Ajah shawl.

Pockets didn't go with me, so I brought along my husband! 

JordanCon 2016 is quickly approaching and I'm wondering if I should make a new dress for the occasion.   I'll give it some very serious thought!

~Buttons

Making the Amyrlin Stole

Today, I finished making an Amyrlin Stole, so I wanted to share with you how easy it is.  Honestly, the whole thing took me an hour and a half!

List of materials:
2 inch x 70 inch strips of fabric (in all the 7 colors of the Ajahs)
White backing fabric (about 12 inches x 70 inches)
Thread
Sewing maching
Pins

Pockets and I had a ton of left over material from when we made our Ajah color quilts (we'll post that soon).  These scraps were about 10 inches by 70 inches.



I cut off a 2 inch strip from each of the colors.





For our quilts, we picked patterns that represented the Ajahs, so the Amyrlin Stole will also have patterned fabrics, but I think it still turned out okay!



We used the color pattern from our canon sources (the New Spring graphic novel).  The order of the Ajah colors goes like this: Blue, Green, Red, Yellow, Gray, White, Brown.

Take your blue and green strips and sew them together with a straight stitch, right side to right side.  The color of thread doesn't matter because these will all be inside seams.



Next, sew the yellow to the green.



Sew the red to the yellow, the gray to the red, the white to the gray, and the brown to the white.



Next, iron down the seams.  It doesn't really matter which direction, only I noticed that the white fabric is a bit see-through, so I ironed the seams away from the white fabric.



Now, take your white backing fabric... Actually, it doesn't even have to be white.  Make it any color you want, or in your Ajah color, and it can double as the Keeper's Stole as well!  I have SO much of this nice, white silky material, so I used that.



Place your Stole face down on the fabric (you'll want them right side to right side).



Pin them together, then cut out the backing fabric.



 

Straight stitch along both the long sides and ONE of the short sides.





You can see the last edge is still open.  This is important!



Now we are going to turn it inside out.  Reach inside and grab the far end.  Pull through.



Tuck under the raw edge about an inch and pin.



Sew it closed.  Since I had white fabric on the bottom and multiple colors on top, I used a white bobbin, and a clear quilting thread on top.  Now, iron it flat.  Be careful if your backing material is silky.  You'll have to iron it with the cotton on top or else it could melt.



And here it is!







Honestly, it's a bit too wide.  The strips could have been thinner.  The whole thing is 9 inches by 69 inches.  It should probably be no wider than 7 inches.  But, for my first try, I'm super pleased with the results!

And here I am with my Keeper of the Chronicles!  I chose to make her Yellow.  :P



~Buttons