Polka Dot Border Skirt

I think I need to stop making skirts.  It seems like it's become an obsession.  Probably because they are so easy.  I'll try to focus on more non-skirt items as my summer continues.

Anyway, I found these two fabrics in the remnant bin at Walmart for less than $2 apiece. The purple is sort of a knit, the kind used for maxi skirts.  It's so soft and comfortable!  The polka dot is a flannel.  I'm not sure about the rules of combining different fabrics, but I don't care; they looked so cute together!

The first thing I did was decide my skirt design.  I played with the idea of doing panels again, but since I just finished a panel skirt--and I wanted to do something quick and easy--so I decided against it.  The best way to do this was to add a simple polka dot border around the bottom of the skirt.

I cut my purple fabric in half, giving me two (relatively) equal pieces.  Then I cut out bands of the polka dot, 5 inches long by 40 inches wide.

Starting with the polka dots, fold the hem of one side up half an inch and iron.

Fold up again, and iron.

 Stitch the folded hem.  I used a double stitch, and a contrasting purple thread.  Repeat for other band.

 

Pin the band to the purple fabric, right side to right side.

Sew together and you get this.

Repeat for other band and purple fabric panel.

Since this purple fabric was so wonky--I've never worked with this before, and I didn't realize it would be so difficult to control; it wouldn't lay flat, even when I ironed it--I measured my skirt from the bottom.  I aligned my bottom hem and pinned the two purple panels together, completely ignoring how they aligned on the top.

Then, sew the panels together.  I even added a zigzag stitch to the inside seam afterwards to give it more support.

Once both sides are stitched up, it's time for the top hem.  I folded down the top to give me an even and straight line, also leaving enough room for my elastic band.

Sew the top hem, leaving an inch long gap to stream the elastic through.

With a safety pin, thread the elastic through the opening in the hem.

Sew the elastic ends together, overlapping them about an inch.  Complete the seam for the hem, and you're finished!

This was an incredibly simple project.  The only thing that slowed me down at all was the uncooperative nature of the knit fabric.  Still, I love the way it feels, and the way it flows so well, so I will have to try another project with this material!

~Buttons

Scalloped Panel Skirt

I wanted to try another panel skirt, and when I was shopping with Pockets, I found an adorable snail print.  The first panel skirt I did was nice, but I wanted this one to be a bit different.  So I played on the snail theme and decided to make this one have scalloped edges.

I drew out a diagram of what I wanted to make--basing it on the same measurements from my original panel skirt. 



For the top layer, I'd use the snail fabric, but I also wanted a plain cotton under skirt.  I chose a green that matched the snails.  And to add a bit more flair, I bought a scalloped ruffle to attach to the bottom of the snail skirt. 



I constructed my pattern out of parchment paper.  



Then I traced it (horizontally) onto my fabric.  This was intentional, giving the snails a side-to-side look rather than a going-up-my-leg look.  



After I cut them out, I sewed them together.  



Then, I added the ruffle.  







Unfortunately, I was about 2-3 inches too short, so I had to cut across the last panel.   



My green fabric wasn't long enough, so I added white to the top to give it the proper length.  (I used a sheet I had cut up for the Greco/Roman day at school.) 



I traced the skirt's general shape, and cut. 



I finished the hem by tucking it under twice and doing a straight stitch.

 I looked at the best way to combine them together, and I was drawing a blank.  The problem was that I cut the underskirt straight across instead of making it rounded like the snails.  This gave it an uneven look no matter how I tired to stagger it.  I thought about just cutting off the bottom seam and redoing a curved hem, but sudden inspiration struck me--more on that in a bit.

What I did to get started was sew the elastic band onto the outerskirt.  I just pinned it about two inches from the top at the front, back, left, and right sides.  Then I pulled the elastic and stitched it onto the fabric.  This made an easy elastic hem at the top--unfinished hem, but still easy.  I could have tucked the leftover fabric under, stitched it down and been done.  But, I did want that green underskirt.

After I had the elastic in place, I took the underskirt and pinned it to the top skirt, right side to right side.  This was a mistake.  But it was what made the sudden inspiration happen, so I went with it.

After it was sewn together, I flipped the underskirt inside and sewed it down, about a half an inch under the current elastic hem.

This is when I realized the underskirt was inside out.  I tried to think about sewing the green fabric up on itself to give me a clean edge.

But then, I thought it would be neat if I could bustle the green fabric.  The length was so off, it had to be lifted or lowered at each panel, so I thought this would be an interesting way to cover up any mistakes in length.

I put it on, and while looking in a mirror to check the length, I pinned the green layer up on itself.

I sewed it down, going all over the place to get some nice bustles and bunches.

And here's the finished product!

I think it turned out pretty cute!  I didn't have a shirt that matched--this neon orange was the closest I could find!  I'll have to find a better one soon.


~Buttons

Harry Potter Wands and Robe

This is actually from last year's Halloween, when Pockets wanted to make her Hufflepuff outfit.  But since we are using them for our Comicon outfits this week, I felt it a good idea to post this as well!

The wands:

Pockets found this tutorial on Pinterest, and we followed it.

Materials:

Paintbrushes

Clay

More paintbrushes

Paint

First, decide on a paintbrush to fit your needs.  Pockets used a medium sized one, but since my wand is "slightly springy" I used a smaller, more dainty paintbrush.

Start by covering the bristle in clay; this will be the wand's handle.

(this is the clay we used)

Next, use the clay as you desire to shape your wand.  I wanted mine (made of hawthorne) to be woody and knotty.  Pockets went with a smooth, but decorative style.

Next bake it.  The directions we used said 10 minutes for every 1/4 inch thickness.  Ours were about 1/2 an inch, so we cooked them for 20 minutes.

Then we painted them.  We had three shades of brown, and a white to mix them with.  Pockets did hers lighter than mine.  I decided to paint my handle a darker color too.

Pockets added a darker wood grain onto her wand, and then painted the swirl that went up from the handle.

Since her's looked so awesome, I added wood grain onto mine as well.

The robes:

For the robes, we used Simplicity pattern 5840.  For fabric, Pockets chose a beautiful black poplin.  It was so easy to work with, and super heavy, for that robe-like look and feel.  She used a light yellow poplin for a faux lining.

The first attempt, just doing as the pattern said, turned out HUGE.

It fit her boyfriend better.

So he got those robes (he's a Gryffindor), and Pockets made a new set for herself, shrinking the pattern an inch in every dimension.

She paired it with a gray skirt, white button up blouse, gray cardigan, a Hufflepuff tie, and a House badge.  It turned out SO CUTE!!

(A Hufflepuff wearing an Aes Sedai ring???)

And for the whole effect (but through a mirror):

Now we're all set for Comicon!

~Buttons

DIY Ravenclaw Uniform

Or, how to make a long sleeved shirt into a sleeveless shirt.

Or, how to make a shirt smaller.

I had many reasons for altering this shirt, as the various titles of the thread suggest.  For the Phoenix Comicon this week, Pockets and I are dressing up in various costumes.  Pockets already had a Hufflepuff outfit from Halloween last year, so I had to come up with making a Ravenclaw one for myself.

First I ordered a Ravenclaw iron on patch from Amazon.  I was very happy to find one in bronze and blue (which is the book canon) rather than the silver and blue (which is the movie canon).  I wanted to be book canon.

With that in mind, I had to find a tie.  Any online are from the movie, so that wouldn't work.  I had to look the old fashioned way and buy one at a department store.  I searched online and found one that looked good at JC Penneys.  I went to the store--with my patch--and it looked pretty good together.  I got it on clearance, $15!

Now I just needed a white button up shirt and a gray cardigan.  Urged by my husband to save some money, I went to Goodwill to see what they had.  First off, I was impressed that everything was grouped by color; that made looking so much easier!  I found a white shirt for $5, but it was an XL--way too big.  I got it anyway.  And I found dark gray (almost charcoal) cardigan for $10.  Lucky!

So, for the shirt, it's ginormous!

And it's really hot here, so I figured it might be best to cut down on the materials I'd be wearing.  So I decided to make it sleeveless.

I cut off the sleeves, right below the seam.  This shirt is a very fancy material and it cut beautifully and has no need for heming the cut.

Next, I put it on inside out and pinned how much I needed to take in the sides.  It's about a inch and a half on either side.

There was still too much fabric in my chest area, so I decided to try a dart.  I've never done darts before and it looked easy enough.  I put the shirt on inside out again, and pinned how much fabric I wanted to take away.

It turned out decent.  Not the best ever, but definitely an improvement!

Now, for my cardigan, all I had to do was iron on my patch!

And here's the whole outfit!

This will be our outfits for Friday.  I'm so excited!


~Buttons